Lumorol® K 5229

from 3,10 €
31,00 € per 1 l
incl. 19% VAT , plus shipping costs

INCI: MIPA laureth sulphate, laureth-4, propylene glycol

Lumorol® K 5229 is an anhydrous surfactant mixture of anionic and non-ionic surfactants and was specially developed for water-free formulations such as shower oil or oil foam Baths.

...more

  • amount 

This item has variations. Please select the requested variation.


INCI: MIPA laureth sulphate, laureth-4, propylene glycol.

If you mix Lumorol® K 5229 with oil, it makes a very good cleaning product for foaming shower or bath oils. When it comes into contact with water, it emulsifies automatically to form a white oil-in-water (O/W) emulsion. It foams well even with a high oil content.

Lumorol® K 5229 is a mixture of fatty alcohol ether sulphate with fatty alcohol polyglycol ether. The product is free of diethanolamide and was specially developed for water-free formulations. The washing-active substance is composed of anionic and non-ionic components plus solvent.
Of these, 40-45% are anionic active ingredient = MIPA-Laureth Sulfate. It has 93% active ingredients with a ph-value of 7 when tested in a 10% solution.

But beware, when using essential oils, a colour change in the final product has been noticed. Therefore, when using different essential oils, test a small amount first. Use concentration of these additives: 2.0 - 5.0%.

-Aqueous mixture of anionic and non-ionic surfactants
-Free of Cocamide DEA
-Developed for water-free formulations (shower oils, bath oils)
-Dilution in water produces an O/W emulsion
-Very soluble in almost all types of oils
-Good foaming properties can be achieved

Signal word:

D : Danger

Danger:

GHS05_1
GHS09_1

H315 : Causes skin irritation

H318 : Causes serious eye damage

H412 : Harmful to aquatic life with long lasting effects

H410 : Very toxic to aquatic life with long lasting effects

H400 : Very toxic to aquatic organisms.

Safety information:

P264 : Wash ... thoroughly after handling

P273 : Avoid release into the environment.

P280 : Wear protective gloves/protective clothing/eye protection/face protection

P302+P352 : In case of contact with skin: Wash with plenty of water/....

P362+P364 : Take off contaminated clothing and wash it before wearing it again.

P391 : Absorb spillages.

P501 : Dispose of contents/container to industrial incineration plant.

P305 + P351 + P338 + P310 : IN CASE OF CONTACT WITH THE EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. if possible. Continue rinsing. Immediately Call a POISON CENTER/doctor immediately.

Category: Surfactants
SKU: 1016
Appearance‍: clearlight yellowthick
Important criteria‍: RSPO Mass BalancesyntheticNon GMOherbal
Induction‍: Lipid phase
Skin type/ condition‍: dry skinevery skin type
Product type/ product type‍: anionicEmulsifierSurfactant
Comment‍: Hair careSkin careSoapOil foam bathShower oil
Solubility‍: at oil
Scent/Smell‍: characteristicmild
Application concentration‍: 30,0 - 60,0%
Country of origin‍: Germany
CAS Nummer‍: 68439-50-9, 1187742-72-8 (83016-76-6), 57-55-6
pH-value‍: 7
Note/additional information‍: temperature stable
ISO 16128‍: NOC (with water) approx. 28% / NOC (without water) approx. 25%
Storage‍: If stored in cold conditions, it may settle. Then simply warm it gently to 30°C. This does not affect the quality.

alexmo cosmetics GmbH

diese vertr. d. d. Geschäftsführer Katja Moritz
Handelshof 14a
28816 Stuhr
Deutschland

Telefon: 0421-84003464
Telefax: 0421-84003462
E-Mail: info@alexmo-cosmetics.de

Category: Surfactants
SKU: 1016
Appearance‍: clearlight yellowthick
Important criteria‍: RSPO Mass BalancesyntheticNon GMOherbal
Induction‍: Lipid phase
Skin type/ condition‍: dry skinevery skin type
Product type/ product type‍: anionicEmulsifierSurfactant
Comment‍: Hair careSkin careSoapOil foam bathShower oil
Solubility‍: at oil
Scent/Smell‍: characteristicmild
Application concentration‍: 30,0 - 60,0%
Country of origin‍: Germany
CAS Nummer‍: 68439-50-9, 1187742-72-8 (83016-76-6), 57-55-6
pH-value‍: 7
Note/additional information‍: temperature stable
ISO 16128‍: NOC (with water) approx. 28% / NOC (without water) approx. 25%
Storage‍: If stored in cold conditions, it may settle. Then simply warm it gently to 30°C. This does not affect the quality.