Alexmo Sun Protect SPF 20 (100g)

Summer, sun, beach and sea. Our favourite season has begun. 
So that the sun does not mean stress for our skin, we have put together a wonderfully light sun cream recipe here.

a)

 56,50g Water

  3,00g Glycerin 99,5 % Bio.

  0,30g Xanthan gum transparent

b)

    9,00g Neutral oil

    2,00g Cetearyl Alcohol

    2.00g Imwitor 375

    2,00g Phospholipone 80H

  20.00g Xperse® Zinc Oxide

    2.00g vitamin E acetates

    0,20g Xanthan gum transparent

c)      

    2,00g Sodium Lactate

    1.00g Chemikons PE9010


How to do:

Mix phase a) and b) separately and heat to 80°C. Add both phases together and homogenize for 5 minutes.
Cool to 35°C and then add phase c) and stir again.

Important! The pH value must be adjusted between 7.2 and 7.8 to ensure that the Xperse® Zinc Oxidee remains stable.
For an optimal sun protection you should use approx. 30g sun cream for the whole body.

If you want to increase the SPF, please reduce the water content. For SPF 30, take 30% Xperse® Zinc Oxide and only 46.5% water.


Lip care stick with SPF 20+ (100g)

  57,70g Jojoba oil

  23,00g Beeswax

    3,80g Fluidlecithin Super

    5,80g Vitamin E Acetates

    7.70g SoFiTix Broadband

    2.00g RonaFlair® LDP White


Melt the fats and then carefully stir in the pigments. RonaFlair® LDP White works in combination with mineral sun protection like a LSF amplifier, so that the protection is much higher than without this filler.

If the pigments are well mixed, simply pour into a lipstick mold (silicone mold for lipsticks) and allow to harden well. Thanks to the lecithin, the pigments do not settle. This ensures even distribution in the fat phase and you receive sun protection right from the start.


Face powder with sun protection SPF 10+ (approx. 100g)


  8.00g Mica LL

  8.00g RonaFlair® Low Chandelier

  5.00g RonaFlair® LDP White

  5.00g SoFiTix Broadband

  1.20g Pigment Yellow, CI 77492

  0.20g Pigment Red, CI77491

  0.30g Pigment Brown, CI77499

  2.00g Magnesium Stearate

65.90g Sericite

RonaFlair® LDP White works in combination with mineral sun protection like an LSF amplifier, so that the protection is much higher than without this filler.

Of course you can adapt the colour pigments to your own wishes. In summer, a little Colorona® Oriental Beige gives the skin a soft tint.
Mix all powders well. Either in a small grinder, or in a food processor. I have bought a machine for exactly this purpose. Only pigments are mixed in this machine.

Finally

  0.30g Tocopherol

  3.70g neutral oil or jojoba oil and possibly add a fragrance and whirl the whole thing again vigorously.

A light, almost transparent powder is ready, which still gives you a little protection from the sun in the "today I don't want to make up" phase.
Or simply apply as a finish.