Hydro-Silk-Fluid

In addition to valuable oils, this ultra-light fluid also provides the skin with plenty of moisture thanks to our raw material Hyalomuco.
It is immediately absorbed by the skin and leaves it feeling silky and nourished.
Hydro-Silk-Fluid
g

Ingredients

A) 3,75 g (0815) Arganöl, organic, cold pressed
2,00 g (0704) Jojobaöl, kaltgepresst, 1. Pressung, kbA
0,50 g (0219) Phospholipon® 80 H

B) 0,75 g (0505) Shea Butter, refined, organic
1,00 g (0209) Emulwitor 375
0,50 g (0471) Phytosteryl Macadamiate

C) 34,50 g Water / Hydrolate
0,50 g (1404) ChemiKons

D) 0,10 g (0518) Xanthan Gum, transparent
1,00 g (0466) Glycerin 98-100% palmoil free, organic

E) 1,00 g (0416) Sodium PCA
1,50 g (0477) Silk-Gel, vegan
0,75 g (0436) Natriumlaktat 60%ige Lösung
0,30 g (0318) Vitamin E pflanzlich
1,00 g (0066) Hyalomuco, acrylate-free
0,75 g (0813) Haferöl, organic

The next larger pack size will be added to the shopping basket, please dose according to the recipe when using.


1 Pcs (1505001) Großes Einsteigerset zum Rühren
1 Pcs (1337050) Pipette bottle, satin finish, 50ml (Pipettenflasche, satiniert, 50ml)

Preparation:

Step 1: 
Prepare all mixing utensils and equipment. 
Disinfect them and your work surface. Please also sanitise the jar or lotion bottle into which you wish to fill the finished product. 

Wear disposable gloves. 

Step 2:
Boil the water. Please also boil purchased distilled water. (It is only salt-free, not necessarily germ-free)

Step 3: 
Now weigh all the raw materials of the individual phases and categorise them according to phase affiliation. 

Manufacture:

Step 1: 
Heat the argan oil, jojoba oil and Phospholipon® 80H to 80°C until everything is dissolved.
Then allow to cool to approx. 60°C.


Step 2: 
Add the ingredients from phase B and mix on high speed. 

At the same time, heat phase C to 60°C. 


Step 3: 
Now add phases A and B to phase C "gulp by gulp" and disperse at high speed. 


Step 4: 
Mix phase D with each other and add to the emulsion. 


Step 5:
At hand heat, add the ingredients from phase E one after the other. Adjust the pH value to 5-5.5 with 1-2 drops of lactic acid.


Tip:
You can create your own fluid by exchanging oils and active ingredients.


This is a sample formulation.
It has been tested and approved by us. However, we cannot guarantee its success and compatibility.